Testing equipment for paper and pulp


Electrical circular sample cutter
For preparing 100 cm² circular samples on paper, cardboard, textile and other materials. For grammage or other properties...

Circular sample punch cutter
The Grammage Cutter has been designed to cut 100 cm² circular paper samples to assess grammage. Grammage in...

Bekk smoothness tester for paper & board
The Bekk Smoothness Tester is microprocessor-controlled instrument for measuring the smoothness of paper and board according to the...

Internal bond tester - Ply bond tester
The internal bond tester or ply bond tester uses the dynamic measuring principle to determine the internal bond...

Horizontal tensile machine
For determination of tensile resistance in dry or wet state.

Burst tester for paper & board - Bursting Strength Tester (Mullen method)
Laboratory equipment with pneumatic clamping to determine Mullen burst in board and paper. Large colour touch screen burst...

Twin folding tester - Schopper principle
Determines the folding resistance of paper acc. to the Schopper principle. The device measures the number of folds...

Bending Resistance Tester
For the determination of bending resistance and stiffness of paper and paperboard according to ISO 2493, TAPPI T556...

Short span compression tester (SCT Test)
The Short Span Compression tester (SCT Test) is used for paper or board stripes with 15 mm width...

Cobb tester - Water absorption tester
The cobb tester is a simple instrument which measures the water absorptiveness of paper, cardboard and corrugated...

Rapid-Köthen Semi-Automatic sheet forming machine
Equipment for the production of standardised paper sheets in the laboratory. Paper sheets are used to know the...

Ink Rub Tester - Sutherland® methode
To determine the ink abrasion resistance and dirtiness characteristics on different supports (paper, cardboard, ceramic, etc.) The test...

Valley Laboratory Beater
For beating pulp under standardized conditions for laboratory purposes

PFI Laboratory Mill
For use in the laboratory for beating of chemical pulps under standardized conditions and also for the desfibration...

Bauer Mc-Nett Fiber Classifier
Equipment for determining the fiber length distribution in pulps. Models made of stainless steel with 3,4 or ...

Speed dryer
For drying purposes of paper or pulp sheets. Also for mass determination of sludge.

Sheet press
Voor het ontwateren en persen van handvellen geproduceerd op vellenmachines volgens TAPPI of SCAN .

Bendtsen Roughness and Air Permeability Tester
The Bendtsen Roughness and Air Permeability tester determines the air permeability and surface roughness according to Bendtsen method...

Somerville classifier - Shive content analyser
The Somerville classifier is used to determine shives/chips and impurities (stickies) in paste/paper pulp. Firstly, it was designed...

Laboratory Disc Refiner
Similar disc refiner to the refiners used in production. Ideal equipment to obtain the real behaviour of the...

Jokro Refining Mill - Jokro Beater
Equipment for refining pulps in standard conditions. Equipment with 6 independent refining devices for 16 grams of paste/pulp...

Paste Homogenizer
To mix mixed and/or refined paste samples and to prevent the caking of fibers in the laboratory·s sheets...

Manual TAPPI Sheet former
For manually manufacturing sheets. It is a traditional system to place on a countertop through manual agitation. The...

Semi-automatic Sheet former
Automatic sheet former has the same system as the manual one. With 159 mm sheets. This equipment avoids...