Centrifugal air blowers
AT series
The AT-series blowers offer highly efficient solutions for process air, drying, or vacuum applications. With availability of power ratings ranging from 7.5 hp to 20 hp, there is an AT-series blower for any industrial application.
Highly efficient for lower energy costs
- State of the art impeller design produces more airflow at lower blower speeds.
- Improved belt design to give less friction.
- Patented filter + silencer design reduces pressure drop and vibration.
Low maintenance blowers
- Automatic belt tensioner.
- Aramid belt lasts 2x longer than polyester belts.
- Patented filter media gives improved performance and longer life.
Low OSHA compliant noise levels
- Equipped with a silencer cartridge to reduce noise by 3 dBA.
- Sound levels can be further reduced with a blower enclosure.
Highly reliable
- High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
- Stringent balancing, quality control and testing prior to leaving the factory.
- Unmatched 3 year warranty.
XT series
The XT-series blowers are Paxton’s highest efficiency blowers for drying and process air applications of all types. Return on investment is often times about one year. The XT-series is available in 3 hp and 5 hp models. The XT-300 is Paxton’s smallest blower and is the foundation of the PowerDry™ System. The XT-series features an auto-tension belt drive designed specifically to enhance the performance, efficiency and service life of the XT-series’ smaller motors. And the energy requirements for the XT-series is substantially less than that of a typical centrifugal blower: an XT-500, for example, delivers 20% more flow at the same pressure when compared to a standard 5 hp centrifugal blower.
Highest efficiency for lowest energy costs
- Auto-tensioning belt with low bearing loads and reduced friction
- State of the art impeller design produces more airflow at lower blower speeds
- Patented filter design reduces pressure drop and vibration
Low maintenance
- Auto-tension belt drive
- No tensioner to replace
- Auto-tensioning belt lasts 3x longer than standard polyester belts
- Patented filter media gives improved performance and longer life
Lower noise levels
- Equipped with a silencer cartridge to reduce noise by 3 dBA
- Sound levels can be further reduced with a blower enclosure
Highly reliable
- High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
- Stringent balancing, quality control and testing prior to leaving the factory
- Unmatched 3 year warranty
PX Series
The new PX-series blowers offer unmatched efficiency. Compared to other high efficiency centrifugal blowers, including Paxton’s own AT-series, the PX-series is 33% more efficient, with blower efficiencies as high as 76%. That means you’ll use 33% less energy!
Paxton has completely redesigned the blower impeller and scroll, improving aerodynamics to generate 33% more airflow per horsepower input .
More Power
The PX-2000 generates as much as 1500 cfm of air flow, with its 20 hp motor. Compare this with only 1125 cfm of air flow with typical 20 hp blowers.
Less Energy
The PX-1500 uses a 15 hp motor but generates as much air flow as standard 20 hp blower. That means you’ll save over $2000 in electrical costs annually – that’s 25% of the operating cost.
More Efficient
The PX-series generates less heat, turning more energy into air power.
- Less Heat = More Air Power
- Less Heat = Longer Blower Life
- Lower Energy Use per CFM of air generated
Highly reliable
- High load capacity bearing at rated speeds for long bearing life. ABEC7 Super Precision Angular Contact bearings made in the USA.
- Stringent balancing, quality control and testing prior to leaving the factory
- Unmatched 3 year warranty
