Standards
T
TAPPI 494
Tensile properties of paper and paperboard
Tappi 833
Test for Interfiber Bond using the Internal Bond tester
TAPPI RC-284
TAPPI T 826
Short span compressive strength of containerboard
TAPPI T-570-00
TAPPI T205
TAPPI T248
Laboratory beating of pulp (PFI mill method)TAPPI T 248 describes the processing of pulp by means of the...
TAPPI T251
Air permeability of porous paper, fabrics, and pulp handsheetsTAPPI T251 Air permeability provides for evaluation of the air...
Tappi T275
TAPPI T403
Bursting Strength of Paper
TAPPI T411
Thickness (caliper) of paper, paperboard, and combined board
TAPPI T414
Internal tearing resistance of Paper(Elmendorf-type method)
TAPPI T441
Water absorptiveness of sized (non-bibulous) paper, paperboard (Cobb test)
TAPPI T448
Water vapor transmission rate of paper and paperboard at 23°C and 50% RH
TAPPI T458
Surface wettability of paper (angle of contact method)
TAPPI T460
Air resistance of paper (Gurley method)
TAPPI T464
TAPPI T464 - Water Vapor Transmission Rate of Paper and Paperboard at High Temperature and Humidity
TAPPI T476
This method determines the resistance of surfaces of paper and paperboard to the action of abrasion, either wet...
TAPPI T496
Specimen preparation for cross directional internal tearing resistance for paper, paperboard and related materials
TAPPI T498
SOFTNESS OF SANITARY TISSUES
TAPPI T519
TAPPI T523
Dynamic Measurement of Water Vapor Transfer Through Sheet Materials.
TAPPI T525
Diffuse Brightness of Pulp (d/0 Degrees)
TAPPI T527
Color of paper and paperboard (d/0, C/2)
TAPPI T534
Brightness of clay and other mineral pigments (d/0 diffuse)This method describes a procedure for determining the brightness of...
TAPPI T536
Resistance of paper to passage of air (high-pressure Gurley method)
TAPPI T541
Internal bond strength of paperboard (Z-direction tensile)
TAPPI T556
Bending resistance of paper and paperboard by single-point bending method.
Tappi T569
Internal bond strength (Scott type) This method defines a test that measures the energy required to rapidly delaminate...
TAPPI T577
This procedure is used to determine the score bend resistance of a scored and unscored sample of a...
TAPPI T749
TAPPI T803
Puncture test of container board, Test Method T 803 cm-20
TAPPI T804
Compression test of fiberboard shipping containers
TAPPI T807
Bursting strength of paperboard and linerboard
TAPPI T808
Flat crush test of corrugated board (flexible beam method)
TAPPI T809
Flat Crush of Corrugating medium (CMT Test)
TAPPI T810
Bursting strength of corrugated board
TAPPI T811
Edgewise compressive strength of corrugated fiberboard (short column test)
TAPPI T815
Coefficient of static friction (slide angle) of packaging and packaging materials (including shipping sack papers, corrugated and solid...
TAPPI T816
Coefficient of Static Friction of Corrugated and Solid Fiberboard (Horizontal Plane Method)
TAPPI T818
Ring crush of paperboard (flexible beam method)
TAPPI T821
Pin adhesion of corrugated board by selective separation
TAPPI T823
Edgewise Compressive Strength of Corrugated Fiberboard (Rigid Support Method)
TAPPI T825
Flat crush test of corrugated board (rigid support method)
TAPPI T838
Edge crush test using neckdown
TAPPI T839
TLMI-7
TSH 1555G
This test procedure serves as a general purpose atmospheric corrosion test and can be applied to a wide...
