Normes
A
AATCC 106
Colorfastness to water: Sea
AATCC 107
Colorfastness to Water
AATCC 114
Chlorine, Retained, Tensile Loss: Multiple Sample Method - This test method is a simplified procedure for testing multiple...
AATCC 117
Colorfastness to heat: Dry (Excluding pressing) - This test method is intended for assessing the resistance of color...
AATCC 124
Smoothness Appearance of Fabrics after Repeated Home Laundering
AATCC 127
Water Resistance: Hydrostatic Pressure TestThis test method measures the resistance of a fabric to the penetration of water...
AATCC 130
Soil Release: Oily Stain Release Method This test method is designed to measure the ability of fabrics to...
AATCC 132
Colorfastness to Drycleaning
AATCC 133
Colorfastness to Heat: Hot Pressing - This test method is intended for determining the resistance of the color...
AATCC 135
Dimensional Changes of Fabrics after Home Laundering - This test method is intended for the determination of dimensional...
AATCC 142
Appearance of Flocked Fabrics after Repeated Home Laundering and/or Coin-Op Drycleaning This test method covers a procedure for...
AATCC 143
Appearance of Apparel and Other Textile End Products after Home Laundering This test method is intended to determine...
AATCC 15
Colorfastness to Perspiration - This test method is used to determine the fastness of colored textiles to the...
AATCC 150
Dimensional Changes of Garments after Home Laundering This test method is for the determination of dimensional (length and...
AATCC 16.1
Colorfastness to Light: Outdoor
AATCC 165
Colorfastness to Crocking: Textile Floor Coverings-Crockmeter Method
AATCC 169
Weather Resistance of Textiles: Xenon Lamp Exposure
AATCC 172
Colorfastness to Powdered Non-Chlorine Bleach in Home Laundering This test method is designed to evaluate the colorfastness to...
AATCC 179
Skew Change in Fabrics After Home Laundering This test method is used to determine change in skew of...
AATCC 187
Dimensional Changes of Fabrics: Accelerated - This test method is an accelerated procedure for determination of the dimensional...
AATCC 188
Colorfastness to Sodium Hypochlorite Bleach in Home Laundering This test method is used to determine the colorfastness to...
AATCC 190
Colorfastness to Home Laundering with Activated Oxygen Bleach Detergent: Accelerated
AATCC 195
Liquid Moisture Management Properties of Textile Fabrics
AATCC 201
Drying Rate of Fabrics: Heated Plate MethodThis test method determines the drying rate of a fabric, exposed to...
AATCC 22
Water Repellency: Spray Test This test method is applicable to any textile fabric, which may or may not...
AATCC 61
Colorfastness to Laundering: Accelerated
AATCC 8
AATCC Test Method 8, Colorfastness to Crocking: AATCC Crock-meter Method Scope: Determines the amount of color transferred from...
AATCC 86
Drycleaning: Durability of Applied Designs and Finishes
AATCC 88B
Smoothness of Seams in Fabrics after Repeated Home Laundering
AATCC 88C
Retention of Creases in Fabrics after Repeated Home Laundering
AATCC 92
Chlorine, Retained, Tensile Loss: Single Sample Method - This is an accelerated test method to determine the potential...
AATCC TM16-2004
Colorfastness to Light
AFERA 4001
AFERA 4008
AFNOR 23035
AFNOR G07-057
Method of test for resistance of fabrics to penetration by water (hydrostatic head test) - Textiles. Méthode d'essai...
ARCADIA AG 32
ARCADIA AG26
ARCADIA AG34
ARCADIA AG35
ASTM 1670
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood.
ASTM 1671
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X17...
ASTM B117
Can be used to test the relative resistance to corrosion of coated and uncoated metallic specimens, when exposed...
ASTM C217
Standard Test Method for Weather Resistance of Slate - This test method covers two procedures for weather resistance...
ASTM D 1000
ASTM D 3420-94
Standard Test Method for Pendulum Impact Resistance of Plastic Film - This test method covers the determination of...
ASTM D1200
Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D1210-05
Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type GageThis test method covers measurement of...
ASTM D1212
Standard Test Methods for Measurement of Wet Film Thickness of Organic CoatingsWet film thickness measurements aid in the...
ASTM D1230
Standard Test Method for Flammability of Apparel Textiles.
ASTM D1316-06
Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI GrindometerOversize particles in a printing...
ASTM D1388
Standard Test Methods for Stiffness of Fabrics This test method covers the measurement of stiffness properties of fabrics...
ASTM D1424
Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus - This test method covers the...
ASTM D1434
Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
ASTM D1475
Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D1518
Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM D1653
Standard Test Methods for Water Vapor Transmission of Organic Coating Films
ASTM D1709
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart MethodScope 1.1 These test methods...
ASTM D1777
Standard Test Method for Thickness of Textile Materials - This test method covers the measurement of the thickness...
ASTM D1894
Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting - This test...
ASTM D1922
Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method - This...
ASTM D202
Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation - These test methods cover...
ASTM D2247
Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity.
ASTM D2457
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D2457
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D2594
Standard Test Method for Stretch Properties of Knitted Fabrics Having Low PowerFabric stretch and fabric growth are useful...
ASTM D2646
Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings
ASTM D2732
Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
ASTM D2923
Standard Test Method for Rigidity of Polyolefin Film and Sheeting
ASTM D295
Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation - These test methods cover procedures for...
ASTM D2979
Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine - This test method covers...
ASTM D3078
ASTM D3107
Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns.5.1 These test methods are used to...
ASTM D3121
Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
ASTM D3330
Standard Test Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Degree Angle
ASTM D3332
Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines.
ASTM D3354
Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method 5.1 Blocking develops in...
ASTM D3359
Standard Test Methods for Rating Adhesion by Tape Test
ASTM D3389
Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)Abrasion resistance tests are intended to measure the...
ASTM D3654
Standard Test Method for Holding Power of Pressure-Sensitive Tapes
ASTM D374
Standard Test Methods for Thickness of Solid Electrical Insulation - These test methods cover the determination of the...
ASTM D3776
Standard Test Methods for Mass Per Unit Area (Weight) of Fabric.These test methods cover the measurement of fabric...
ASTM D3884
Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)This guide covers the determination of the...
ASTM D3985
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
ASTM D4060
Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber AbraserThis test method covers the determination...
ASTM D4169
Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D4212
Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D4329
ASTM D4361
Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller TackmeterTack of printing inks...
ASTM D4414 - 95(2020)
Standard Practice for Measurement of Wet Film Thickness by Notch Gages This practice describes the use of thin...
ASTM D4521
Standard Test Method for Coefficient of Static Friction of Corrugated and Solid Fiberboard - This test method covers...
ASTM D4587
Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings.
ASTM D4712
Standard Guide for Testing Industrial Water-Reducible Coatings.This guide covers the selection and use of procedures for testing water-reducible...
ASTM D4799
Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV and Condensation Method
ASTM D4966
Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D4970
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Teste
ASTM D4974
Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D5146
Standard Guide to Testing Solvent-Borne Architectural CoatingsThis guide covers the selection and use of procedures for testing solvent-borne...
ASTM D523
Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
ASTM D523
Standard Test Method for Specular Gloss
ASTM D5264
Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester. Abrasion resistance is a desirable...
ASTM D5276
Standard Test Method for Drop Test of Loaded Containers by Free Fall.
ASTM D5732
Standard Test Method for Stiffness of Nonwoven Fabrics Using the Cantilever Test WITHDRAWN - This test method covers...
ASTM D5946
Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements - This test method covers measurement...
ASTM D6037
Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings.This test method covers procedures for evaluating...
ASTM D6279
Standard Test Method for Rub Abrasion Mar Resistance of High Gloss CoatingsCoatings, particularly the high gloss coatings used...
ASTM D6287
Standard Practice for Cutting Film and Sheeting Test Specimens
ASTM D6413
Standard Test Method for Flame Resistance of Textiles (Vertical Test)
ASTM D642
Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
ASTM D6545-00
Standard Test Method for Flammability of Textiles Used in Children’s Sleepwear - This test method evaluates the relative...
ASTM D6695
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D6828 - 02
Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM D724
Standard Test Method for Surface Wettability of Paper (Angle-Of-Contact Method) - This test method measures the angle of...
ASTM D726
Standard Test Method for Resistance of Nonporous Paper to Passage of Air - This test method covers the...
ASTM D737
Standard Test Method for Air Permeability of Textile FabricsThis test method covers the measurement of the air permeability...
ASTM D7386
Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
ASTM D751
Standard Test Methods for Coated Fabrics - These test methods cover, but are not limited to, rubber-coated fabrics...
ASTM D781
Method of Test for Puncture and Stiffness of Paperboard, Corrugated and Solid Fiberboar
ASTM D7869
Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM D823
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels.
ASTM D823
Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D882
Standard Test Method for Tensile Properties of Thin Plastic Sheeting
ASTM E96 / E96M
Standard Test Methods for Water Vapor Transmission of Materials
ASTM F1140
Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages.ASTM F1140 evaluates the response of flexible packaging...
ASTM F1249
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM F1307
Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
ASTM F1862
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed...
ASTM F1868
Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plat
ASTM F1921
Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces...
ASTM F1927
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through...
ASTM F2029
Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured...
ASTM F2054
Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates.
ASTM F2095
Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates.
ASTM F2100
Standard Specification For Performance Of Materials Used In Medical Face Masks.This specification covers the classifications, performance requirements, and...
ASTM F2101
ASTM F2296
Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
ASTM F2299
Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by...
ASTM F2622
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2714 - 08
Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Deca
ASTM F3299
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor...
ASTM F3299 - 18
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor...
ASTM F392
Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
ASTM F510
Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed...
ASTM F735
ASTM F735 – Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand...
ASTM F88
Standard Test Method for Seal Strength of Flexible Barrier Materials
ASTM F903
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
ASTM G151
Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G154
Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
ASTM G155
Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G43
Acidified Synthetic Sea Water (Fog) TestingCan be used to test the relative resistance to corrosion of coated or...
ASTM G85
Standard Practice for Modified Salt Spray (Fog) Testing
ASTM G87
Standard Practice for Conducting Moist SO2 TestsASTM G87-02 is a Standard for Conducting this moist Sulphur Dioxide (So2)...
ATCC TM16.3
Colorfastness to Light: Xenon-Arc
