Standards

DIN 50018

Testing in a saturated atmosphere in the presence of sulfur dioxideThis standard specifies the general conditions and procedures...

DIN 52347

Testing of glass and plastics; abrasion test; method using abrasion wheels and measurement of scattered light.

DIN 53105

Testing of paper and board; determination of single sheet bulking thickness, bulking density and bulk

DIN 53107

Testing of paper and board - Determination of the smoothness by the Bekk method

DIN 53108

Testing of paper and board - Determination of roughness according to Bendtsen

DIN 53109

Testing of paper and board – Determination of abrasion by the abrasion wheel method.

DIN 53120

Determination of medium-range air permeance of paper and board by the Bendtsen method

DIN 53121

Testing of paper and board - Determination of the bending stiffness by the beam method.

DIN 53122-2

DIN 53128

Testing of paper; determination of tearing resistance according to Elmendorf (single tear tester)

DIN 53353

Testing of artificial leather and similar sheet materials determination of thickness with mechanical feelers.

DIN 53370

Testing of plastic films - Determination of thickness by mechanical scanning

DIN 53375

Testing of plastic film and sheeting; determination of the coefficients of friction

DIN 53754

Testing of plastics; determination of abrasion, abrasive disk method

DIN 53799

Decorative laminated sheets on basis of aminoplastic resins; test method

DIN 53799

Decorative laminated sheets on basis of aminoplastic resins; test method.

DIN 53862

Testing of textiles; determination of the tear resistance of wovenfabrics by falling-pendulum according to elmendorf

DIN 53887

Testing of textiles; determination of air permability of textile fabrics

DIN 54005

Testing of colour fastness of textiles; determination of colour fastness of dyeings and prints to water (mild)

DIN 54006

Testing of colour fastness of textiles; determination of colour fastness of dyeings and prints to water.

DIN 54007

Testing of colour fastness of textiles; Determination of colour fastness of dyeings and prints to sea water

DIN 54020

Testing of colour fastness of textiles; determination of colour fastness of dyeing and prints to perspiration.

DIN 54360

Pulps - Laboratory beating - Jokro mill method.

DIN 54518

Testing of paper and board - Compression strength, short span test

DIN 67530

Reflectometer as a means for gloss assessment of plane surfaces of paint coatings and plastics

DIN 68861-2

Furniture surfaces - Part 2: Behavior at abrasion

DIN EN 22872

Packaging; complete, filled transport packages; compression test (ISO 2872:1985); german version EN 22872:1992

DIN EN 25264-2

Pulps - Laboratory beating - Part 2: PFI mill methodZellstoff - Labormahlung - Teil 2: PFI-Mühle-Verfahren

DIN EN 29865

Textiles; determination of water-repellency of fabrics by the Bundesmann rain-shower test

DIN EN 438-2

High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of...

DIN EN ISO 7263

Corrugating medium -- Determination of the flat crush resistance after laboratory fluting