Standards

STABILITY TESTING: PHOTOSTABILITY TESTING OFNEW DRUG SUBSTANCES AND PRODUCTS

QUALITY OF BIOTECHNOLOGICAL PRODUCTS:STABILITY TESTING OF  BIOTECHNOLOGICAL/BIOLOGICALPRODUCTS

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction IEC 61730-1:2016 specifies and describes the fundamental...

IEC TS 62788-7-2:2017(E) defines test procedures to characterize the weatherability of polymeric component materials used in photovoltaic (PV)...

TOOL AND DIE STEELS - SPECIFICATIONDescribes the requirement for plain carbon and alloy tool and by steel in...

Method of Test for Smoothness/Roughness of Paper

Identification cards -- Test methods -- Part 2: Cards with magnetic stripesISO/IEC 10373-2:2015 defines test methods for characteristics...

Textiles -- Tests for colour fastness -- Part A11: Determination of colour fastness grades by digital imaging techniques

Textiles - Tests for colour fastness - Part B02 Colour fastness to artificial light: Xenon arc fading lamp...

Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test

Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high...

Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial...

Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation

Textiles - Tests for colour fastness -Part C01: Colour fastness to washing: Test 1This part of ISO 10...

Textiles -- Tests for colour fastness -- Part C02: Colour fastness to washing: Test 2This part of ISO...

Textiles -Tests for colour fastness - Part C03: Colour fastness to washing: Test 3 This part of ISO...

Textiles - Tests for colour fastness - Part C04: Colour fastness to washing: Test 4This part of ISO...

Textiles - Tests for colour fastness - Part C05: Colour fastness to washing: Test 5This part of ISO...

Textiles - Tests for colour fastness -- Part C06: Colour fastness to domestic and commercial launderingISO 105-C06 specifies...

Textiles -- Tests for colour fastness -- Part C08: Colour fastness to domestic and commercial laundering using a...

Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering -- Oxidative...

Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and...

Textiles -Tests for colour fastness - Part D01: Colour fastness to drycleaning using perchloroethylene solvent

Textiles -- Tests for colour fastness -- Part D02: Colour fastness to rubbing: Organic solvents ISO 105-D02:2016 specifies...

Textiles - Tests for colour fastness - Part E01: Colour fastness to water

Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water

Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration

Textiles -Tests for colour fastness -Part E05: Colour fastness to spotting: Acid

Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline millingISO 105-E12 specifies a...

Textiles - Tests for colour fastness - Part P01: Colour fastness to dry heat (excluding pressing)

Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing

Textiles -- Tests for colour fastness -- Part X12: Colour fastness to rubbing ISO 105-X12:2016 specifies a method...

Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials

Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load

Textiles -Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation

Deals with the testing of paints, varnishes and related products. Specifies a test method for determining under standard...

Paints and Varnishes - Exposure of coatings to artificial weathering- Exposure to fluorescent UV lamps and waterThis International...

Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light...

Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light

Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester

Hygrothermal performance of building materials and products — Determination of water vapour transmission properties — Cup method ISO...

Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption

Tissue paper and tissue products — Part 5: Determination of wet tensile strength

Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test methodISO 12625-8:2010 specifies...

Tissue paper and tissue products - Part 9: Determination of ball burst strength

Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 1: Pilling box method

Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method

Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion...

Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of...

Corrugated fibreboard - Determination of edgewise crush resistance - Waxed edge method

Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force...

Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method ISO...

Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 1: Fixed seam...

Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 2...

Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf)

Textiles — Tear properties of fabrics — Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method)

Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break ISO 1421:2016 specifies two methods...

Protective clothing — Protection against flame — Method of test for limited flame spread ISO 15025:2016 specifies two...

Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methods ISO 15105-1:2007 specifies...

lastics - Film and sheeting -- Determination of gas-transmission rate - Part 2: Equal-pressure method

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 2: Infrared detection sensor method

Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method

Paints and varnishes - Scratch testSpecifies a test method for determining under defined conditions the resistance of a...

Paints and varnishes - determination of film hardness by pencil testISO 15184:2012 specifies a method for determining the...

Paints, varnishes and printing inks -- Determination of fineness of grind ISO 1524:2013 specifies a method for determining...

Paper and board -- Determination of z-directional tensile strengthSpecifies a method for the determination of z-directional tensile strength...

Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance ISO 16474-...

Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lampsISO 16474-2:2013 specifies...

Corrosion of metals and alloys -- Corrosion in artificial atmosphere -- Accelerated corrosion test involving exposure under controlled...

Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method

Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)

Paper -- Determination of tearing resistance -- Elmendorf methodISO 1974:2012 specifies a method for determining the (out-of-plane) tearing...

Textiles — Fabrics — Determination of width and length ISO 22198:2006 specifies a method for the determination of...

This document specifies a method for assessing the resistance of materials or products to a humid atmosphere containing...

Packaging -- Complete, filled transport packages -- Vertical impact test by dropping Principle: Raising of the test package...

Clothing for protection against infectious agents — Medical face masks — Test method for resistance against penetration by...

Textiles - Determination of dimensional change of fabrics - Accelerated machine method

ISO 2409:2020 Paints and varnishes — Cross-cut test This document specifies a test method for assessing the resistance...

Paints and varnishes — Determination of flow time by use of flow cups Specifies a method for determining...

Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)

Paper, board and pulps Measurement of diffuse blue reflectance factor (ISO brightness)

Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method

Paper and board -- Determination of resistance to bending

Sheet materials -- Determination of water vapour transmission rate (WVTR) -- Gravimetric (dish) method

PLASTICS - DETERMINATION OF THE GAS TRANSMISSION RATE OF FILMS AND THIN SHEETS UNDER ATMOSPHERIC PRESSURE -- MANOMETRIC...

Paper -Determination of bursting strength ISO 2758:2014 specifies a method for measuring the bursting strength of paper submitted...

Board -Determination of bursting strength

Paints and varnishes - Determination of film thickness ISO 2808 describes a number of methods that are applicable...

Paints and varnishes - Determination of gloss value at 20 degrees, 60 degrees and 85 degrees

Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colourSpecifies...

Corrugated fibreboard -Determination of single sheet thickness

Corrugated fibreboard - Determination of flat crush resistance

ISO 3036 Board — Determination of puncture resistance This International Standard specifies a method for determining the puncture...

Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method)

Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxideThe principle of the procedure specified...

Pulps - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)

Textiles - Woven fabrics - Determination of mass per unit length and mass per unit area. For some...

Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and...

High-pressure decorative laminates (HPL, HPDL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination...

Polymeric materials, cellular flexible — Determination of air flow permeability

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods ISO...

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 2: Ballistic pendulum method

Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps ISO 4892-2:2013 specifies methods...

Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps ISO 4892-3 specifies...

Textile fabrics - Determination of resistance to surface wetting (spray test) ISO 4920:2012 specifies a spray test method...

Textiles - Determination of dimensional change in washing and drying ISO 5077:2007 specifies a method for the determination...

Pulps — Laboratory wet disintegration — Part 1: Disintegration of chemical pulps.ISO 5263-1:2004 specifies an apparatus and the...

Pulps — Laboratory beating — Part 2: PFI mill methodISO 5264-2:2011 specifies a method for the laboratory beating...

Pulps — Laboratory beating — Part 3: Jokro mill method Is limited to the furnishing and beating of...

Pulps — Preparation of laboratory sheets for physical testing — Part 1: Conventional sheet-former method ISO 5269-1:2005 specifies...

Plastics - Determination of tensile properties ISO 527-1:2012 specifies the general principles for determining the tensile properties of...

Paper and board - Determination of thickness, density and specific volume

Paper and board - Determination of water absorptiveness - Cobb method ISO 535:2014 specifies a method of determining...

ISO 5470 – Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 2: Martindale abrader

Rubber- or plastics-coated fabrics -Determination of abrasion resistance - Part 1: Taber abrader

Paper - Determination of folding endurance Specifies the methods for the determination of folding endurance of paper using...

Paper and board - Determination of smoothness (Bekk method)

Paper & Board - Determination of air permeance

Paper and board - Determination of air permeance (medium range) -- Part 1: General method

Paper and board - Determination of air permeance (medium range) - Part 3: Bendtsen method

Paper and board - Determination of air permeance (medium range) - Part 5: Gurley method

Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) -SpecificationISO 5893:2002 specifies...

Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in...

Textiles -Domestic washing and drying procedures for textile testing

Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens. ISO 6940:2004 specifies...

Textile fabrics — Burning behaviour — Measurement of flame spread properties of vertically oriented specimens.ISO 6941:2003 specifies a...

Metallic and other non organic coatings — Sulfur dioxide test with general condensation of moistureSpecifies a method for...

Corrugating medium -- Determination of the flat crush resistance after laboratory fluting

Anodizing of aluminium and its alloys — Measurement of specular reflectance and specular gloss of anodic oxidation coatings...

ISO 7784-2 – Paints and varnishes — Determination of resistance to abrasion — Part 2: Method with abrasive...

Textiles - Determination of resistance to water penetration - Hydrostatic pressure test

Plastics - Film and sheeting - Determination of the coefficients of friction

Plastics - Film and sheeting - Determination of wetting tension ISO 8296:2003 specifies a method for determining the...

Paper and board - Determination of roughness/smoothness (air leak methods) - Part 1: General method

PAPER AND BOARD - DETERMINATION OF ROUGHNESS/SMOOTHNESS (AIR LEAK METHODS) -- PART 2: BENDTSEN METHOD

Textiles -- Test methods for nonwovens -- Part 16: Determination of resistance to penetration by water (hydrostatic pressure)ISO...

Textiles — Test methods for nonwovens — Part 4: Determination of tear resistance

Corrosion tests in artificial atmospheres -Salt spray tests ISO 9227:2017 specifies the apparatus, the reagents and the procedure...

Textiles - Determination of the permeability of fabrics to air

ISO 9352 – Plastics — Determination of resistance to wear by abrasive wheels. 

Textiles -- Determination of water repellency of fabrics by the Bundesmann rain-shower testDescribes the principle, the atmosphere for...

Paper and board - Compressive strength - Short-span test ISO 9895:2008 specifies a method for determining the compressive...

Partial Simulation Performance Tests - ISTA 2A tests are for packaged-products 150 lb. (68 kg) or less, and...

General Simulation Performance Tests - Test Procedure 3A is for packaged-products weighing 150 lb. (70 kg) or less...

ISTA 3B is a general simulation test for packaged-products shipped through a motor carrier (truck) delivery system, where...

ISTA 6 Series: Member Performance Tests. Test protocols created by ISTA members to meet their particular purposes and...