High Pressure Water Spray Test chamber IPx9K

High Pressure Water Spray Test chamber IPx9K is suitable for the IPX9K waterproof level test of the product. The main function of this equipment is for passenger cars, buses, tractors, motorcycles and other vehicles and their parts, under the cleaning process conditions of high pressure/steam jet cleaning , To test the physical and other related properties of the product.

Application: Rain & Water Ingress Test Chambers

Caractéristique: Dust, sand and water resistance (IP testing)

The inner chamber material is made of SUS#304 stainless steel with 1.2mm thickness. Full welding structure, its sealing is very well and it’s not easy to get cracked.
The external material is made of cold-rolled plate with 1.5mm thickness, it has gone through brushing, polishing, painting treatment, it's not easy to get scratched.
The insulation material is made of polyurethane foam with thicknessof 100mm.
The door seal adopts double silicon rubber sealing material.
The observation window is 4 layers of tempered glass, the size you can choose by yourself.
In addition, in order to prevent frosting on the observation window when running low temperature, we setup a heating wires inside to get it di-frosting.

IPX9K is the highest rating currently available for water ingress protection in accordance with IEC 60529 and ISO 20653.
Products under test is subjected to high pressure (8000 – 10000 Kpa), high temperature (+80°C) and water jets at a flow rate of 14 – 16 L/min.

Model	SR/IPX9K/1000
Testing room size (WHD mm)	100010801050
External size (WHD mm)	150019501250
Test bench area	400mm
Water surface temperature	80±5.0℃
Flow	14~16L/min
Pressure	8000~10000kpa
Angle	The nozzles are distributed at 0°, 30°, 60°, 90°counter clockwise
Rotating speed	1~20r/min can also be used for speed regulation without joints
Water pressure control	Electromagnetic flowmeter
Power supply	AC380V TN-S

High Pressure Water Spray Test chamber IPx9K

Plus d'info?