Crush Tester - STauchdruckpresse

Search icon
Crush Crush Tester 03 Crush Tester 02 CrushTester_sample

Zur Messung der Druckfestigkeit von Karton und Kurvaturplatten.
Die zu prüfende Probe wird in die Crushplatten gelegt. Die untere Platte wird mit der gewählten Geschwindigkeit bis zur höheren Platte bewegt. Die Probe zwischen den Platten wird zertrümmert, die für diesen Test erforderliche Kraft registriert und die Kurve wird auf dem Bildschirm angezeigt.

Product details

  • Possibility to carry out different type of tests on paper and corrugated board.
  • By means of exchanging the sample holder accessory, it is possible to make RCT, CMT, ECT, CCT, FCT and PAT tests. Sample holders not included.
  • High rigidity steel and aluminum frame
  • Connections
    • Electric : 220/110V, 50/60Hz
    • Air supply: 6 bar
  • Dimensions
    • Weight and dimensions (only equipment) : 380 x 460 x 750 mm (WxLxH), 65 Kg
    • Weight and dimensions with packing box: 450x520x900 mm (WxLxH), 120 Kg

Applications

The holder is placed with the test specimen centered in the lower plate of the compression tester. When the test begins,the inferior plate will displace upward and a load will begin to be applied to the specimen. This force is captured by means of a load cell coupled to the upper plate. When the system detects the sample breaking, the inferior plate returns to the initial position at the maximum speed.

Weitere Informationen?