Prüfgerät nach Norm

AATCC 106

AATCC 107

AATCC 114

Chlorine, Retained, Tensile Loss: Multiple Sample Method - This test method is a simplified procedure for testing multiple samples to...

AATCC 117

AATCC 124

Smoothness Appearance of Fabrics after Repeated Home Laundering

AATCC 127

Water Resistance: Hydrostatic Pressure TestThis test method measures the resistance of a fabric to the penetration of water...

AATCC 130

AATCC 132

Colorfastness to Drycleaning

AATCC 133

Colorfastness to Heat: Hot Pressing - This test method is intended for determining the resistance of the color of textiles...

AATCC 135

Dimensional Changes of Fabrics after Home Laundering - This test method is intended for the determination of dimensional (length and...

AATCC 142

Appearance of Flocked Fabrics after Repeated Home Laundering and/or Coin-Op Drycleaning This test method covers a procedure for...

AATCC 143

Appearance of Apparel and Other Textile End Products after Home Laundering This test method is intended to determine...

AATCC 15

Colorfastness to Perspiration - This test method is used to determine the fastness of colored textiles to the effects of...

AATCC 150

AATCC 16.1

Colorfastness to Light: Outdoor

AATCC 165

Colorfastness to Crocking: Textile Floor Coverings-Crockmeter Method

AATCC 169

Weather Resistance of Textiles: Xenon Lamp Exposure

AATCC 172

AATCC 179

Skew Change in Fabrics After Home Laundering This test method is used to determine change in skew of...

AATCC 187

AATCC 188

Colorfastness to Sodium Hypochlorite Bleach in Home Laundering This test method is used to determine the colorfastness to...

AATCC 190

Colorfastness to Home Laundering with Activated Oxygen Bleach Detergent: Accelerated

AATCC 195

Liquid Moisture Management Properties of Textile Fabrics

AATCC 201

Drying Rate of Fabrics: Heated Plate MethodThis test method determines the drying rate of a fabric, exposed to...

AATCC 22

AATCC 61

Colorfastness to Laundering: Accelerated

AATCC 8

AATCC Test Method 8, Colorfastness to Crocking: AATCC Crock-meter Method Scope: Determines the amount of color transferred from the...

AATCC 86

Drycleaning: Durability of Applied Designs and Finishes

AATCC 88B

Smoothness of Seams in Fabrics after Repeated Home Laundering

AATCC 88B C

AATCC 92

Chlorine, Retained, Tensile Loss: Single Sample Method - This is an accelerated test method to determine the potential damage caused...

AATCC TM16-2004

Colorfastness to Light

AFERA 4001

AFERA 4008

AFNOR 23035

AFNOR G07-057

Method of test for resistance of fabrics to penetration by water (hydrostatic head test) - Textiles. Méthode d'essai...

ARCADIA AG 32

ARCADIA AG26

ARCADIA AG34

ARCADIA AG35

ASTM B117

Can be used to test the relative resistance to corrosion of coated and uncoated metallic specimens, when exposed...

ASTM C217

Standard Test Method for Weather Resistance of Slate - This test method covers two procedures for weather resistance of slate...

ASTM D 1000

ASTM D1210-05

Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type GageThis test method covers measurement of...

ASTM D1212

Standard Test Methods for Measurement of Wet Film Thickness of Organic CoatingsWet film thickness measurements aid in the...

ASTM D1230

Standard Test Method for Flammability of Apparel Textiles.

ASTM D1316-06

Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI GrindometerOversize particles in a printing...

ASTM D1424

Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus - This test method covers the determination of...

ASTM D1434

Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

ASTM D1518

Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate

ASTM D1653

Standard Test Methods for Water Vapor Transmission of Organic Coating Films

ASTM D1709

Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart MethodScope 1.1 These test methods cover...

ASTM D1777

Standard Test Method for Thickness of Textile Materials - This test method covers the measurement of the thickness of most...

ASTM D1894

Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting - This test method covers...

ASTM D1922

Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method - This test method covers the...

ASTM D202

Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation - These test methods cover procedures for...

ASTM D2457

Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

ASTM D2646

Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings

ASTM D2923

Standard Test Method for Rigidity of Polyolefin Film and Sheeting

ASTM D295

Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation - These test methods cover procedures for the testing...

ASTM D2979

Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine - This test method covers measurement of...

ASTM D3078

ASTM D3121

Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

ASTM D3330

Standard Test Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Degree Angle

ASTM D3332

Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines.

ASTM D3389

Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)Abrasion resistance tests are intended to measure the...

ASTM D3420-94

Standard Test Method for Pendulum Impact Resistance of Plastic Film - This test method covers the determination of resistance of...

ASTM D3654

Standard Test Method for Holding Power of Pressure-Sensitive Tapes 

ASTM D374

Standard Test Methods for Thickness of Solid Electrical Insulation - These test methods cover the determination of the thickness of...

ASTM D3776

Standard Test Methods for Mass Per Unit Area (Weight) of Fabric.These test methods cover the measurement of fabric...

ASTM D3884

Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)This guide covers the determination of the...

ASTM D3985

Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

ASTM D4060

Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber AbraserThis test method covers the determination...

ASTM D4169

Standard Practice for Performance Testing of Shipping Containers and Systems

ASTM D4329

ASTM D4361

Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller TackmeterTack of printing inks...

ASTM D4521

ASTM D4587

Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings.

ASTM D4712

Standard Guide for Testing Industrial Water-Reducible Coatings.This guide covers the selection and use of procedures for testing water-reducible...

ASTM D4799

Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV and Condensation Method

ASTM D4966

Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)

ASTM D4970

Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Teste

ASTM D4974

Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven

ASTM D5146

Standard Guide to Testing Solvent-Borne Architectural CoatingsThis guide covers the selection and use of procedures for testing solvent-borne...

ASTM D523

Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

ASTM D5264

Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester.Abrasion resistance is a desirable and...

ASTM D5276

Standard Test Method for Drop Test of Loaded Containers by Free Fall.

ASTM D5946

Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements - This test method covers measurement of the...

ASTM D6037

Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings.This test method covers procedures for evaluating...

ASTM D6279

Standard Test Method for Rub Abrasion Mar Resistance of High Gloss CoatingsCoatings, particularly the high gloss coatings used...

ASTM D6287

Standard Practice for Cutting Film and Sheeting Test Specimens

ASTM D6545-00

Standard Test Method for Flammability of Textiles Used in Children’s Sleepwear - This test method evaluates the relative flammability of...

ASTM D6695

Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

ASTM D6828 - 02

Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure

ASTM D724

Standard Test Method for Surface Wettability of Paper (Angle-Of-Contact Method) - This test method measures the angle of contact...

ASTM D726

Standard Test Method for Resistance of Nonporous Paper to Passage of Air - This test method covers the determination...

ASTM D737

Standard Test Method for Air Permeability of Textile FabricsThis test method covers the measurement of the air permeability...

ASTM D7386

Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

ASTM D751

Standard Test Methods for Coated Fabrics - These test methods cover, but are not limited to, rubber-coated fabrics, that is...

ASTM D7869

Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

ASTM D882

Standard Test Method for Tensile Properties of Thin Plastic Sheeting

ASTM E96 / E96M

Standard Test Methods for Water Vapor Transmission of Materials

ASTM F1140

Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages.ASTM F1140 evaluates the response of flexible packaging...

ASTM F1249

Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

ASTM F1307

Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

ASTM F1868

Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plat

ASTM F1921

Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces...

ASTM F1927

Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through...

ASTM F2029

Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured...

ASTM F2054

Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates.

ASTM F2095

Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates.

ASTM F2296

Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)

ASTM F2622

Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors

ASTM F2714 - 08

Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Deca

ASTM F3299

Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor...

ASTM F3299 - 18

Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor...

ASTM F510

Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed...

ASTM F735

ASTM F735 – Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand...

ASTM F88

Standard Test Method for Seal Strength of Flexible Barrier Materials

ASTM G151

Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

ASTM G154

Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

ASTM G155

Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

ASTM G43

Acidified Synthetic Sea Water (Fog) TestingCan be used to test the relative resistance to corrosion of coated or...

ASTM G85

Standard Practice for Modified Salt Spray (Fog) Testing